Mounting On A Wall - LG 43LX570H Easy Setup Manual

Mounting on a Wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the wall
mount bracket on a solid wall perpendicular to the
floor. If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. When you do
not use LG's wall mount bracket, use a wall mount
bracket where the device is adequately secured to
the wall with enough space to allow connectivity
to external devices.
10 cm
(4 in c h e s )
1 0 c m
10 cm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
32/40/43LX560H
Model
32/40/43LX570H
VESA (A x B)
200 x 200
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW240B
(optional) MSW240
49LX560H
Model
49/55LX570H
VESA (A x B) 300 x 300
Standard screw M6
Number of screws 4
LSW350B
Wall mount bracket
MSW240
(optional)
A
B
1 0 c m
65LX570H
300 x 300
M6
4
LSW350B
CAUTION
• Disconnect the power before moving or
installing the TV. Otherwise electric shock may
occur.
• Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.
• If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.
• Do not overtighten the screws as this may cause
damage to the TV and void your warranty.
• Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
• Use the screws that are listed in the VESA
standard screw specifications.
• The wall mount kit includes an installation
manual and necessary parts.
• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
• The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
• For more information, refer to the manual
supplied with the wall mount.
• When using the wall mounting bracket, apply
the adhesive protective label to cover the
unused stand opening(s). This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)
Provided Item
Adhesive protective label
11