Setting Surface Controls - LG LRE30451ST Owner's Manual & Cooking Manual

SETTING SURFACE CONTROLS

When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
To turn on a single surface unit
(Right Rear, Left Rear, Right Front)
1. Press ON/OFF for the desired
element position. The display will
flash
(If no further pads are pressed
within 10 seconds, the display will
disappear.)
2. Press
power level Hi or
3. Use the
desired power setting.
(Adjustable at any time while the
element is ON.)
4. To turn off the unit after cooking,
press ON/OFF once.
• Each time a pad is pressed a beep will sound.
Note:
• The power level decreases or increases by 0.5
from 9.0 through 3.0. (by 0.2 from 3.0 through
1.0)
• Lo is the lowest power level available.
CAUTION
The surface elements may still be hot and burns may
occur. Do not touch surface elements until it has
cooled down sufficiently.
CAUTION
At high or medium-high setting, never leave food
unattended. Boilovers cause smoking and greasy
spillovers may catch on fire.
SURFACE CONTROLS COOKING
.
once to turn on the
once for Lo.
/ to choose the
/ is continuously accessible.
To turn on a dual surface unit (Left Front)
1. Press ON/OFF. The display will
2. Press ELEMENT SIZE as needed to
3. Press
4. Use the
5. To turn off the unit after cooking,
• Each time a pad is pressed a beep will sound.
Note:
• The power level decreases or increases by 0.5 from
9.0 through 3.0. (by 0.2 from 3.0 through 1.0)
• Lo is the lowest power level available.
The surface elements may still be hot and burns may
occur. Do not touch surface elements until it has
cooled down sufficiently.
Recommended Surface Cooking
Settings
Recommended setting for the single & dual elements.
Setting
HIGH Start most foods, bring water to a
(8.5 – Hi) boil or pan broiling.
MEDIUM HIGH Continue a rapid boil, fry, or deep
(5.5 – 8.0) fat fry.
MEDIUM Maintain a slow boil, thicken sauces
(3.5 – 5.0) and gravies, or steam vegetables.
MEDIUM LOW Keep foods cooking, poach, or stew
(2.2 – 3.0) (2.8 or lower is a simmer setting).
LOW/SIMMER Keep warm, melt, or simmer.
(Lo – 2.0)
- 7 -
flash .
(If no further pads are pressed within
10 seconds, the display will
disappear.)
select the desired burner size. When
first selected, 12" size is ON. The
light above ELEMENT SIZE indicates
which size surface unit is on.
once to turn on the power
level Hi or once for Lo.
/ to choose the desired
power setting. / is continuously
accessible. (Adjustable at any time
while the element is ON.)
press ON/OFF once.
CAUTION
Type of cooking