Usb Keyboard Support; Onboard Parallel Port; Uart Mode Select - Gigabyte 7VT600-RZ User Manual

Amd athlon, athlon xp, duron, socket a processor motherboard
Table of Contents

Advertisement

F

USB Keyboard Support

M
When a USB keyboard is installed, please set at Enabled.
Enabled USB Keyboard Support.
8Enabled
Disabled USB Keyboard Support. (Default value)
8Disabled
F
USB Mouse Support
Enabled USB M ouse Support.
8Enabled
Disabled USB Mouse Support. (Default value)
8Disabled
F
VIA LAN Boot ROM *
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Disable this function. (Default Value)
8Disabled
Enable this function.
8Enabled
F
Onboard Serial Port 1
BIOS will autom atically setup the port 1 address.
8Auto
Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default value)
83F8/IRQ4
Enable onboard Serial port 1 and address is 2F8,Using IRQ3.
82F8/IRQ3
Enable onboard Serial port 1 and address is 3E8,Using IRQ4.
83E8/IRQ4
Enable onboard Serial port 1 and address is 2E8,Using IRQ3.
82E8/IRQ3
Disable onboard Serial port 1.
8Disabled
F
Onboard Serial Port 2
BIOS will autom atically setup the port 2 address.
8Auto
Enable onboard Serial port 2 and address is 3F8,Using IRQ4.
83F8/IRQ4
Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value)
82F8/IRQ3
Enable onboard Serial port 2 and address is 3E8,Using IRQ4.
83E8/IRQ4
Enable onboard Serial port 2 and address is 2E8,Using IRQ3.
82E8/IRQ3
Disable onboard Serial port 2.
8Disabled
F

OnBoard Parallel port

M
This feature allows you to select from a given set of param eters if the parallel port uses the
onboard I/O controller.
Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)
8378/IRQ7
Enable onboard LPT port and address is 278,Using IRQ5.
8278/IRQ5
Enable onboard LPT port and address is 3BC,Using IRQ7.
83BC/IRQ7
Disable onboard parallel port.
8Disabled
F

UART Mode Select

This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal
Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA
Set onboard I/O chip UART to IrDA M ode.
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
SCR
Set onboard I/O chip as Smart Card interface.
" * " For 7VT600-RZ-C only.
- 27 -
BIOS Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

7vt600-rzc

Table of Contents