Temperature/Humidity Trend Arrows; Set Weather Alerts - La Crosse Technology S84107V2 Instruction Manual

Temperature/Humidity Trend Arrows

• The UP and DOWN arrows indicate changes in temperature
and humidity over the past hour.
• They update every 15 minutes and compare data from
exactly one hour prior.
Temperature: arrow changes every 2 degrees Fahrenheit.
Humidity: arrow changes every 3% RH

Set Weather Alerts

There are 8 programmable weather alerts:
• Outdoor LOW Temperature
• Outdoor HIGH Temperature
• Outdoor LOW Humidity
• Outdoor HIGH Humidity
• Indoor LOW Temperature
• Indoor HIGH Temperature
• Indoor LOW Humidity
• Indoor HIGH Humidity
Note: When you enter the alerts menu, you will first arm the
alert you wish to set, then set the alarm value.
Note: If you do wish not arm the alert, simply press the
ALERTS button to skip that alert and move to the next alert in
the alert menu.
Page | 11 www.lacrossetechnology.com/support
• Hold the ALERTS button to enter alert menu.
• Outdoor LO ALERT ON | OFF will flash.
Alert ON:
1. Press the + or - button to arm the alert. Press the ALERTS
button to make the armed alerts value flash.
2. Press the + or - button to set the alert value (Hold to set
quickly).
3. Press ALERTS button to move to next alert.
4. Press the LIGHT button at any time to exit.
Alert OFF:
1. Alerts are OFF unless armed. If you do not wish to set an
alert, simply press the ALERTS button again to move to the
next alert.
Alert OFF: press + or- to arm
S84107v2 S84107v2
Alert ON: press + or- to adjust
www.lacrossetechnology.com/support Page | 12