GE JES1651SJ03 Owner's Manual page 9

49-40507 v02 1/18/06 2:36 PM Page 9
ADAPTER PLUGS
Usage situations where appliance's power cord will be disconnected
infrequently.
Because of potential safety
hazards under certain conditions,
we strongly recommend against the
use of an adapter plug. However,
if you still elect to use an adapter,
where local codes permit,
a TEMPORARY CONNECTION may
be made to a properly grounded
2-prong wall receptacle by the use of
a UL listed adapter which is available
at most local hardware stores.
The larger slot in the adapter must be aligned with the larger slot
in the wall receptacle to provide proper polarity in the connection
of the power cord.
CAUTION:
receptacle cover screw does not ground the appliance unless the cover
screw is metal, and not insulated, and the wall receptacle is grounded
through the house wiring.
You should have the circuit checked by a qualified electrician to
make sure the receptacle is properly grounded.
When disconnecting the power cord from the adapter, always hold
the adapter with one hand. If this is not done, the adapter ground
terminal is very likely to break with repeated use. Should this
happen, DO NOT USE the appliance until a proper ground has
again been established.
Usage situations where appliance's power cord will be disconnected
frequently.
Do not use an adapter plug in these situations because frequent
disconnection of the power cord places undue strain on the
adapter and leads to eventual failure of the adapter ground
terminal. You should have the two-prong wall receptacle replaced
with a three-prong (grounding) receptacle by a qualified electrician
before using the appliance.
(Adapter plugs not
permitted in Canada)
Align large
prongs/slots
TEMPORARY
METHOD
Attaching the adapter ground terminal to the wall
ge.com
Ensure proper ground
and firm connection
before use.
9