Windows Xp, Windows Server 2003 - Usb - Gestetner C7425dn Software Manual

Preparing for Printing
• RPCS
D:DRIVESRPCSWIN2K_XP(Language)DISK1
• PCL 5c
D:DRIVESPCL5cWIN2K_XP(Language)DISK1
• PostScript 3
D:DRIVESPS3WIN2K_XP(Language)DISK1
I
Check the printer driver location, and then click [OK].
J
Click [Next].
K
Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the "USB001" port is added to the [Printers]
window.
❒ The number after "USB" varies depending on the number of printers con-
nected.

Windows XP, Windows Server 2003 - USB

❒ Installing a printer driver requires Administrators permission. Log on using an
account that has Administrators permission.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the "USB" port is added to the [Printers] window.
The printer drivers can be installed from the CD-ROM provided with this printer.
If the printer driver is not installed, follow the plug-and-play instructions of the
printer to install it from the CD-ROM provided.
A
Check that the power of the printer is off.
B
Connect the printer and computer using the USB cable.
C
Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed au-
tomatically.
D
In the Found New Hardware Wizard display, click [Search for a suitable driver
for my device [recommended] ], and then click [Next>].
E
To disable Auto Run, press the left {SHIFT} key when inserting the CD-
ROM into the drive and keep it pressed until the computer finishes read-
ing from the CD-ROM.
62