Table of Contents
Advertisement
Combination Chart
A given combination of the copy features may or may not be available depend-
ing on the order of its setup.
Blank: : These modes can be used together.
× : These modes cannot be used together. The first mode selected will be the
mode you are working in.
• : These modes cannot be used together. The second mode selected will be the
mode you are working in.
Following lists the combinations of functions.
*1
A function incompatibility message appears if the original you have set is 2-sided or
exceeds 433 mm (17 inch). Copy is not possible until one of the functions is disabled.
*2
A function incompatibility message appears if you load a sheet that exceeds 432 mm
(17 inch). Copying is not possible until one of the functions is disabled.
*3
A function incompatibility message appears if you load OHP transparencies. Copy
is not possible until one of the functions is disabled.
*4
A function incompatibility message appears if you select two conflicting functions.
Copy is not possible until one of the functions is disabled.
*5
Enabled by the second mode selected.
3. Appendix
AMA070S
65
Advertisement
Table of Contents
