Configuration Menu - Sony UTX-B03 Operating Instructions Manual

Configuration menu

Procedure for portable diversity tuner (URX-P03)
This section describes each function and configurable
items.
Underlined entries are factory default values.
Selecting group/channel (GP/CH)
The factory default setting varies depending on the
model.
For details, see "Setting the receive channel" (page 21).
Adjusting the monitor audio level
(PHONES)
Adjusts the monitor audio level for the headphones.
The factory default setting is 12.
For details, see "Adjusting the monitor audio level"
(page 22).
Setting an available channel automatically
(AUTO SET)
Automatically searches for and sets an available channel,
and starts infrared transmission to the transmitter.
For details, see "Operation" (page 19).
Selecting the frequency band (BAND)
Selects the receive frequency band.
Note
This menu is not available on Japanese and Korean
models. On these models, the frequency band cannot be
selected.
For details about the groups and channels in each
frequency band, refer to the "Frequency List" on the
CD-ROM.
Searching for and selecting available
channels (CLR SCAN)
Searches for available channels.
For details, see "Searching for available channels within
a group (Clear Channel Scan)" (page 21).
Setting the audio output level (OUT
LEVEL)
Sets the audio output level. You can set the level in 3 dB
increments in the range –12 dB to +12 dB. The factory
default setting is 0 dB.
Note
The monitor output level does not change when you
change the output level in the OUT LEVEL menu. The
monitor output level is adjusted separately.
For details about adjusting the monitor audio level, see
"Adjusting the monitor audio level" (page 22).
Using infrared transmission (SYNC)
Transfers the frequency and compander mode set on the
tuner to a transmitter using an infrared transmitter.
1
Use the + or – button to display the SYNC menu.
2
Press and hold the SET button for one second or
longer.
A confirmation screen appears.
3
Use the + or – button to display "YES."
4
Turn the transmitter power on, and place the infrared
transmitter port on the tuner near the infrared detector
on the transmitter.
A prompt appears on the transmitter display asking
you whether to change the frequency.
5
Use the + or – button on the transmitter to select YES.
6
Press the SET button on the transmitter.
The frequency and compander mode for use on the
transmitter are set.
Notes
• When using the infrared link, place the tuner and
transmitter within about 20 cm (8 in.) of each other.
• After the infrared transmission starts, place the tuner
near the transmitter within ten seconds. After ten
seconds have elapsed, the infrared transmission finishes
and the display returns to the previous menu.
• After the prompt appears on the transmitter, you can
select NO or do nothing for about five seconds to return
to the previous menu screen automatically, and the
information received over the infrared link is discarded.
Displaying the accumulated running time
(TIME)
Displays the accumulated running time of the tuner as a
guide to total usage time.
The factory default setting is 00:00. Up to 99:99 can be
displayed.
To reset the time display
1
Press and hold the SET button until the time display
starts flashing.
23
Tuner Settings