Operation With Radio; Presetting The Radio Stations; Listening To The Radio - LG LH-W752TA Owner's Manual

Hide thumbs Also See for LH-W752TA:
Table of Contents

Advertisement

Operation with Radio

Presetting the radio stations

You can preset 50 stations for FM and AM (MW). Before
tuning, make sure that you have turned down the vol-
ume.
Press BAND on the remote control until FM or
1 1
AM (MW) appears in the display window.
And then every time you press BAND, FM and
2 2
AM (MW) changes alternately.
Press and hold TUNING
3 3
the front panel for about two seconds until the
frequency indication starts to change, then
release.
Scanning stops when the DVD/CD Receiver tunes in a
station. "TUNED" and "STEREO" (for stereo program)
appear in the display window.
4 4
Press PROG./MEMO. on the remote control.
A preset number will flash in the display window.
D D
E E
5 5
Press PR (
/
) on the remote control to select
the preset number you want.
Press PROG./MEMO. on the remote control
6 6
again.
The station is stored.
Repeat steps 3 to 6 to store other stations.
7 7
To tune in a station with a weak signal
Press TUNING
or
to tune in the station manually.
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and "CLEAR ALL" is appeared in the display window
and then press PROG./MEMO. again, the stations are
cleared.
If you have accidentally entered into the "CLEAR ALL"
and you do not wish to clear the memory, do not
press any key. After a few seconds, the "CLEAR ALL"
display will go off by itself and change to mode.
ote
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.

Listening to the radio

Preset radio stations in the DVD/CD Receiver's memory
first (see "Presetting radio stations" on the left).
1 1
2 2
or
on
3 3
To turn off the radio
Press POWER to turn the DVD/CD Receiver off or
select another function mode (DVD/CD, AV 1, etc.,).
To listen to non-preset radio stations
To select a preset radio station directly
You can use the number buttons on the remote control
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
repeatedly in step 3
remote control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
For your reference
Press BAND until AM (MW) or FM appears in the
display window.
The last received station is tuned in.
Press PR(
D D
/
E E
) repeatedly on the remote control
to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
Use manual or automatic tuning in step 2.
For manual tuning, press TUN(-) b or TUN (+) B on
the remote control repeatedly.
For automatic tuning, press and hold TUN(-) b or
TUN (+) B for about two seconds on the remote
control.
If an FM program is noisy
Press MONO/ST. on the front panel so that
"STEREO" disappears in the display window.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
To improve reception
Reorient the supplied antennas.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents