Speaker System Connection; Transmitter; Changing A Channel Of Transmitter; Setting A Id Of Transmitter - LG LH-W752TA Owner's Manual

Connections (Continued)

Speaker System Connection

ote
If there is a strong electromagnetic wave product
nearby, an interference may be occurred.
(Ex : Micro wave oven)

Transmitter

SIGNAL ID./CH. DC IN

Changing a channel of Transmitter

If there is a similar wireless product nearby, interference
may occur. In this case, change to other channel using
ID/CHANNEL (ID./CH.) button of transmitter.
Press the ID/CHANNEL (ID./CH.) button for less
than about 3 seconds.
ote
The wireless speakers may not received the changed channel of
transmitter. In this case set the ID as below.

Setting a ID of Transmitter

When you connect the wireless speaker for the first
time, the blue and red LED indicator of wireless speaker
blinks in turn and then the ID will be set automatically.
If an interference is occurred or you use a new wireless
speaker, set the ID.
1. Press the ID/CHANNEL (ID./CH.) button for more
than about 3 seconds.
The blue LED indicator blinks.
2. Turn the transmitter and wireless speaker off and
then turn it on.
LED indicator
Displays the operated
status.
DC IN connector
ID/CHANNEL (ID./CH.)
button
SOUND SIGNAL
connector
Assembling and Connecting to
the Speakers
The front and rear speakers are detached from the
speaker stands. Connect the speaker cords and assem-
ble the front and rear speakers from speaker stands as
illustrated.
Connect the speaker cords to the appropriate termi-
nals on the bottom of each front and rear speaker.
After connecting the speaker cords to the appropriate
terminals on the bottom of each front and rear speak-
er and attach the front and rear speakers to the
speaker stands.
ote
You cannot detach the speaker from the stand after assem-
bling the front and rear speakers.
11