Scanning
You can scan original documents or photos and save them as digital files.
Starting a Scan
Scanning with Document Capture Pro or Document Capture
Scanning in Epson Scan 2
Scan Resolution Guidelines
Scanning Special Projects
Starting a Scan
After placing your original documents or photos on your product for scanning, start scanning using one of
these methods.
Starting a Scan from a Scanner Button
Starting a Scan Using the Epson Scan 2 Icon
Starting a Scan from a Scanning Program
Parent topic:
Starting a Scan from a Scanner Button
You can scan using the
(Windows) or Document Capture (Mac) and the scan job you have assigned to the button.
Note: Make sure Epson Scan 2 and either Document Capture Pro (Windows) or Document Capture
(Mac) are installed on the computer connected to the scanner. Document Capture (Mac) does not
support scanning from the
Network Interface Unit can only locate Windows-based computers. Launch Epson Scan 2 before
scanning from the
1. Make sure the scanner is connected to your computer or network.
2. Load an original in your scanner.
3. Press the
The scanner starts the job that was assigned to the
(Windows) or Document Capture (Mac).
Scanning
start button on your scanner. This automatically starts Document Capture Pro
start button on your scanner using the Epson Network Interface Unit; the
start button on your scanner.
start button.
start button in Document Capture Pro
46