Removing the Stand
Tilt the stand in the direction indicated while pushing the PUSH marks with both hands.
PUSH
Attaching the Optional KX-HDV20 to the Unit
The optional KX-HDV20 has 20 DSS keys, and it adds 40 function keys (20 keys ´ 2 pages) to the unit.
These keys can be used to seize a line to make or receive a call or to perform a feature that has been
assigned to the key.
1. Remove the stand from both the KX-HDV230 and KX-HDV20. See "Removing the Stand", Page 57.
2. Insert the tabs of the KX-HDV20 into the designated openings in the base, and then slide the
KX-HDV20 in the direction of the arrow.
3. Fasten the KX-HDV20 to the unit with the included screw.
4. Attach the stand to both the KX-HDV230 and the KX-HDV20. See "Attaching the Stand", Page 55.
Or, if the unit will be mounted on a wall, perform wall mounting. See "Wall Mounting", Page 60.
5. Connect the KX-HDV20 to the unit with the included cable. See "Connections (including optional
KX-HDV20)", Page 58.
6. Turn on the KX-HDV230.
2
PUSH
3
Installation and Setup
57