Using The Zoom - Ricoh WG-60 Start Manual

Using the Zoom

You can use the zoom to change the captured area.
1
Press the W/T button in A mode.
W Wide (left)
Widens the area that is captured by the
camera.
T Tele (right)
Enlarges the subject.
If you continue to press T, the camera
automatically switches from optical zoom to
Intelligent Zoom and stops at the point where
the zoom switches to digital zoom.
Once the button is released and pressed again, the camera switches to digital
zoom.
If the digital zoom is set to off in the menu, the optical zoom and the Intelligent
Zoom ranges are available for use. The zoom ratio of the Intelligent Zoom varies
depending on the number of recorded pixels.
The zoom bar is displayed as follows.
Zoom in with high image quality.
*1 You can zoom in to a maximum of 5x optically.
*2 The Intelligent Zoom range varies depending on the number of recorded
pixels. See the following table.
Recorded pixels and the maximum zoom ratio
Recorded Pixels
/
6/
f/
h (*1)
h
32
Optical zoom range
(The zoom ratio includes the 5x optical zoom.)
/
Not Available (5x optical zoom only)
Zoom in with some degree of image
*1
Intelligent
Zoom range
Intelligent Zoom
Approx. 7.5x
Approx. 8.9x
Approx. 11.3x
Approx. 12x
Zoom bar
3 8 3 8
deterioration.
Digital zoom
*2
range
Digital zoom
Equivalent to
approx. 36x
Zoom ratio
36.0 36.0 36.0