Taking Still Pictures; Taking Pictures - Ricoh WG-60 Start Manual

Taking Still Pictures

Taking Pictures

This camera has various functions and shooting modes that support a wide array
of scenes and subjects. This section explains shooting with the default settings
when shipped.
1
Press the power button.
The camera turns on and is ready to take still pictures. In this manual, this is
called Still Picture Capture Mode.
2
Check the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the automatic focusing area.
When the camera detects a person's face,
the Face Detection function is activated and
the face detection frame appears.
You can change the captured area by pressing the zoom button (p.32).
Right (T)
Left (W)
3
Press the shutter release button
halfway.
The camera emits focus assist light in dark
shooting situations.
The focus frame (or face detection frame)
on the display turns green when the camera
focuses on the subject.
30
Enlarges the subject.
Widens the area that is captured by the camera.
3 8 3 8 3 8
Focus frame
3 8 3 8 3 8
Face detection frame
1 / 2 5 0 1 / 2 5 0 1 / 2 5 0
F 4 . 6 F 4 . 6 F 4 . 6
3 8 3 8 3 8