Existing Network - D-Link DAP-1620B1 User Manual

Section 3 - Configuration

Existing Network

Select the type of existing network, either Ethernet or Wi-Fi
you want the DAP-1620 to connect to. Select Ethernet if you are
connecting to your network via an Ethernet cable. Select Wi-Fi if
you are connecting to your network by wireless means.
Wi-Fi - Existing Network
If Wi-Fi is selected, the following Wi-Fi Existing Network options will appear.
Wi-Fi Name (SSID) Type in the Wi-Fi Name of the network you would like to extend.
Password Type in the password of the network you would like to extend.
Scan If Scan is pressed, a window will pop up showing you available Wi-Fi
networks. You can choose the network you would like to extend.
After selecting the network option, press Select and you will be
prompted to enter a password if required. Press OK to confirm
your selection.
D-Link DAP-1620 User Manual
Existing Network
35