Checking And Adjusting The Leap Second Setting - Citizen CC701555E Instruction Manual

Checking and adjusting the leap second setting

This watch displays the time by applying the leap second to the International
Atomic Time information received from satellites.
The leap second may be applied once a few years and the leap second setting on the
watch is automatically adjusted when it is applied.
Check and adjust the leap second setting manually following the steps below when
it is not adjusted automatically.
You can find a list of leap seconds at the website of IERS (INTERNATIONAL
EARTH ROTATION & REFERENCE SYSTEMS SERVICE):
http://hpiers.obspm.fr/eop-pc/earthor/utc/TAI-UTC_tab.html
Information on satellite signal reception
Continued on the next page
73