LG FH2G6TDY Series Owner's Manual page 39

Water is not coming because too
much detergent use.
Laundry is hot or warm after
finished washing because the
inlet hoses are installed in
reverse.
Water is not supplied because
the water tap is not turned on.
Leakage caused by improper
installation of drain hose or
clogged drain hose.
Leakage caused by improper
installation of water inlet hose or
using other brand inlet hoses.
No power problem caused by
loose connection of power cord
or electrical outlet problem.
Service trips to deliver, pick
up, install the product or for
instruction on product use. The
removal and reinstallation of the
Product.
If all screws are not installed
properly, it may cause excessive
vibration (Pedestal model only).
Water hammering (banging)
noise when washing machine is
filling with water.
Dispenser
Cold
Water
Inlet
water tap
Level
High
Pressure
Water
Loud noise
Hit!!
Clean the detergent
disperser drawer.
Hot
Water
Reinstall the inlet hoses.
Inlet
Turn on the water tap.
Reinstall the drain hose.
Elbow
Bracket
Tie Strap
Reinstall the inlet hose.
Reconnect the power cord
or change the electrical
outlet.
The warranty covers
manufacturing defects
only. Service resulting from
improper Installation is not
covered.
1°
Install 4 screws at each
corner (Total 16EA).
Adjust the water pressure
Natural
by turning down the water
water flow
Sudden
valve or water tap in the
stopping
water flow
home.
39