Needle Threader - Janome MOD-200 Instruction Book

z
q
x c
x
e w
v
b
w
c
r
r
t

Needle Threader

CAUTION:
Turn OFF the power switch when using the needle
threader.
z Lower the presser foot. Raise the needle to its highest
position.
Turn the power switch off.
Pull down the needle threader knob as far as it will
go. The hook comes out through the needle eye from
behind.
q Knob
w Hook
x Draw the thread from the left guide to the right guide
and under the hook.
e Left guide
r Right guide
c Draw the thread to the front along the right side of the
right guide.
v Raise the knob in the direction of the arrow, drawing
the thread loop through the needle.
t Thread loop
b Pull the thread through the needle eye.
NOTE:
The needle threader can be used with a #11 to #16
needle or a blue tip needle. Thread sizes 50 to 90 are
recommended.
19