Epson SureColor T2170 User Manual page 122

Advanced Media Setting menu (in the Roll Paper menu)
Setting
Platen Gap
Top/Bottom Margins
Back Tension
Drying Time
Auto Cut
Auto Sheet Feeder menu
Setting
Media Adjust
Options Description
1.6 Adjusts the distance between the print head
and the paper; displayed when Custom
2.1
Paper is selected as the Paper Type setting
Standard The Standard margins are as follows for the
top and bottom:
Top 3 mm/Bottom 3
mm • CAD/line drawings: 3 mm
Top 15 mm/Bottom 15 • Other: 30 mm
mm
Select a different value as necessary.
Top 45 mm/Bottom 15
mm
Note: Left and right margins are always 3
mm.
Auto Select High or Extra High if paper wrinkles
during printing
Standard
High
Extra High
Drying Time per Pass Select from 0 to 10 seconds for the amount of
time the print head pauses to allow drying
after each pass
Drying Time per Page Select from 0 to 60 minutes for the amount of
time the printer pauses to allow drying after
each page is printed
On Select On to automatically cut roll paper after
each page is printed, or select Off to cut paper
Off
manually
Options Description
Start Prints an adjustment pattern to check and
adjust print quality or custom paper settings;
follow the on-screen instructions
122