Advertisement
Quick Links
OWNER'S MANUAL
PRODUCT DESCRIPTION – The SHUTTLE 6.0® bass amplifier has been designed with our unique ULTRA LIGHT
unified design process, yielding a 600 watt professional high powered tour-class bass guitar amplifier weighing
less than 3.75 lbs! This compact design blends the best of analog and digital platforms to produce the ultimate in
warmth, punch and power.
The Shuttle 6.0® is equipped with a ¼" unbalanced instrument input, input stage clip detector, mute switch with
LED indicator, 12AX7 tube preamp with extended range variable input gain, 3 switched signal shape filters with LED
indicators, 3 band active equalization with sweepable midrange frequency, master volume control, proprietary output
limiter, ¼" tuner output, aux input, effects loop, balanced direct out with ground lift/pre-post/mic-line switches,
headphone output, and 2 Neutrik NL-4 "Speak-On"™ speaker jacks.
The power amp is a powerful, lightweight Class D design and is supported by a state-of-the-art digital Switch Mode
Power Supply (SMPS), which does away with the weight of a traditional power transformer. The Shuttle 6.0's power
supply is usable from 100-240 volts, lending itself well to international touring players.
1
Advertisement
Related Manuals for Genz Benz Shuttle 6.0
Summary of Contents for Genz Benz Shuttle 6.0
- Page 1 The Shuttle 6.0® is equipped with a ¼” unbalanced instrument input, input stage clip detector, mute switch with LED indicator, 12AX7 tube preamp with extended range variable input gain, 3 switched signal shape filters with LED indicators, 3 band active equalization with sweepable midrange frequency, master volume control, proprietary output limiter, ¼”...
-
Page 2: Front Panel
FRONT PANEL INPUT – The SHUTTLE 6.0® is equipped with a standard ¼” unbalanced input. The input sensitivity range is from 300 mV to 1.25 volts. The input impedance is >500k ohms. The input stage contains a precision high order ac- tive high pass filter (more effective and less intrusive than the more common 6 dB filters) and an “RFI”... - Page 3 SIGNAL SHAPE – The SHUTTLE 6.0® is equipped with 3 Signal Shape circuits. The L.F. BOOST adds low frequency peaking gain in the 38-67 HZ band. This filter is especially effective when used with a 5 string bass. The MID SCOOP switch generates midrange cut at approx.
-
Page 4: Rear Panel
POWER AMPLIFIER – The SHUTTLE 6.0® uses a state of the art, class D power amplifier design and a high frequency switch-mode power supply to achieve unprecedented high performance and lightweight packaging. Switch-mode power supplies convert the AC line directly to high voltage DC, then the precision PWM inverter creates a new AC power signal at a frequency approximately 2000 times higher than the original wall frequency of 50/60Hz. - Page 5 To clean the amplifier, nothing more than a damp cloth and a little bit of glass cleaner (like Windex™) should be used. RACK MOUNTING – The SHUTTLE 6.0® is designed to be rack mounted in a standard EIA style 19” equipment rack or tour-case. Optional rack mounting kit is available from your dealer GIG-BAG –...
-
Page 6: Block Diagram
• This amplifier should not be exposed to dripping or splashing and no objects filled with liquids, such as vases or drinks, shall be placed on this product. • The Shuttle 6.0 amplifier should be connected to a mains socket outlet (power receptacle) with a protective earth (ground) connection at all times. -
Page 7: Declaration Of Conformity
• In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and it’s designers, sales agents and all other affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting fro such use.