ASROCK H110M-DVS R2.0 User Manual page 24

Chassis Intrusion and
Speaker Header
(7-pin SPK_CI1)
(see p.6, No. 14)
Serial ATA3 Connectors
(SATA3_0:
see p.6, No. 8)
(SATA3_1:
see p.6, No. 9)
(SATA3_2:
see p.6, No. 10)
(SATA3_3:
see p.6, No. 11)
USB 2.0 Headers
(9-pin USB_7_8)
(see p.6, No. 15)
(9-pin USB_9_10)
(see p.6, No. 6)
USB 3.0 Header
(19-pin USB_11_12)
(see p.6, No. 5)
SPEAKER
DUMMY
DUMMY
+5V
1
SIGNAL
GND
DUMMY
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_P1_SSRX-
IntA_P0_SSRX- IntA_P1_SSRX+
IntA_P0_SSRX+ GND
GND IntA_P1_SSTX-
IntA_P0_SSTX-
IntA_P1_SSTX+
IntA_P0_SSTX+ GND
GND IntA_P1_D-
IntA_P0_D- IntA_P1_D+
IntA_P0_D+ ID
1
Please connect the
chassis intrusion and the
chassis speaker to this
header.
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
Besides two USB 3.0 ports
on the I/O panel, there
is one header on this
motherboard. Each USB
3.0 header can support
two ports.
* USB_11_12 is shared with
USB_9_10.
H110M-DVS R2.0
19