Table of Contents
Advertisement
Disables the upload function
Communication status screen display
: Standby. No images are to be sent.
: Upload standby
: Connecting
: Uploading
: Error
Note
Eye-Fi cards are only sold in certain countries/regions.
For more information on Eye-Fi cards, please contact the manufacturer or vendor directly.
Eye-Fi cards can be used only in the countries/regions where they were purchased. Use
Eye-Fi cards in accordance with the law of the countries/regions where you purchased
the card.
Eye-Fi cards are equipped with a wireless LAN function. Do not insert an Eye-Fi card into
the product in locations in which their use is prohibited, such as on an airplane. When an
Eye-Fi card is inserted into the product, set [Upload Settings] to [Off]. When the upload
function is set to [Off], the
Power save mode will not function during uploading.
If
(error) is displayed, remove the memory card and reinsert it, or turn the product
off and then on again. If the indicator appears again, the Eye-Fi card may be damaged.
Wireless LAN communication may be influenced by other communication devices. If the
communication status is poor, move closer to the access point to be connected.
This product does not support Eye-Fi "Endless Memory Mode." Before using an Eye-Fi
card, be sure that "Endless Memory Mode" is turned off.
[183] How to Use
Tile Menu
Selects whether to always display the first screen of the menu when you press the MENU
button.
1. MENU →
Menu item details
On:
Always displays the first screen of the menu (Tile Menu).
Off:
Deactivates the Tile Menu display.
indicator will be displayed on the product.
Changing settings
(Setup) → [Tile Menu] → desired setting.
Setup menu
Advertisement
Table of Contents
