Panasonic PT-LB355U Operating Instructions Manual page 63

[Keystone]
[V Keystone]
*1
[H/V Keystone]
[Corner correction]
[Curved correction]
[Reset value]
*2
*1 Only for PT-LB305D.
*2 Only for PT-LW375D, PT-LW335D, PT-LB425D, PT-LB425T, PT-LB385D, PT-LB385T, PT-LB355D and PT-LB355T.
[Keystone]
Set whether or not to keep the keystone correction even after the projector is turned off or the power cord is disconnected.
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [Keystone].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[Reset]
[Store]
[V Keystone]
(Only for PT-LB305D)
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [V Keystone].
4) Press the <ENTER> button.
5) Press as to correct the keystone.
Operation
Press the a button.
Press the s button.
[H/V Keystone]
(Only for PT-LW375D, PT-LW335D, PT-LB425D, PT-LB425T, PT-LB385D, PT-LB385T, PT-LB355D and PT-LB355T)
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [H/V Keystone].
4) Press the <ENTER> button.
f The [H/V Keystone] individual adjustment screen is displayed.
Chapter 4 Settings - [Expand] menu
Sets whether or not to keep the keystone correction even after the projector is turned off or
the power cord is disconnected.
Adjusts when the vertical trapezoid of the projected image is distorted.
Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.
*2
Adjusts when the four corners of the projected image are distorted.
*2
Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted.
*2
Returns the corrected values to the factory default values.
If the [Setting] menu → [Standby mode] is set to [Eco], the keystone correction will be canceled
when you disconnect the power cord or turn off the projector.
If the [Setting] menu → [Standby mode] is set to [Normal], the keystone correction will be canceled
when you disconnect the power cord; the keystone correction will be kept when you turn off the
projector.
The keystone correction will be kept when you plug out the power cord or turn off the projector.
The top becomes smaller.
The bottom becomes smaller.
Adjustment
ENGLISH - 63