Table of Contents
Advertisement
bAutomatic safety cut-out
I f a hotplate has been switched on for a long time
A u t o m a t i c s a f e t y c u t - o u t
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
[Energy consumption
indicator
Y ou can use this function to have the total energy
E n e r g y c o n s u m p t i o n i n d i c a t o r
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 9
"‰
and the
•
/
œ
residual
QBasic settings
Y our appliance has various basic settings. You can
B a s i c s e t t i n g s
adapt these settings to suit your own needs.
Display
Function
screen
Automatic childproof lock
™‚
Switched off.*
‹
Switched on.
‚
Manual and automatic childproof lock switched off.
ƒ
Audible signal
™ƒ
Confirmation signal and operation error signal are
‹
switched off (main switch signal always remains).
Only the operation error signal is switched on.
‚
Only the confirmation signal is switched on.
ƒ
Confirmation signal and operation error signal switched
„
on.*
Energy consumption display (Ask your electricity sup-
™„
ply company what the mains voltage is)
Consumption display switched off.*
‹
Consumption display with mains voltage at 230 V.
‚
Consumption display with mains voltage at 220 V.
„
Consumption display with mains voltage at 240 V.
...
Automatic timer
™†
Switched off.*
‹‹
Cooking time, after which the hotplates switch off.
‹‚
-
ŠŠ
™‡
Duration of the timer end signal
10 seconds.*
‚
30 seconds
ƒ
1 minute.
„
Activation of the heating elements
™ˆ
Switched off.
‹
Switched on.
‚
Last setting before the hotplate was switched off.*
ƒ
Time for selecting the hotplate
™Š
Unlimited: the last selected hotplate can always be
‹
adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust
‚
it, after which you will have to select it again in order to be
able to adjust it.
Reset the basic settings
™‹
Switched off.*
‹
Switched on.
‚
*Basic setting
Automatic safety cut-out
en
9
Advertisement
Table of Contents
