Mounting On A Wall - Philips 86BDL4152T/75 User Manual

1.4.

Mounting on a Wall

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that
complied with TUV-GS and /or UL1678 standard in North America.
1. Prepare a flat and horizontal surface that is larger than the display and spread a thick protective sheet on it to facilitate your operation without
scratching the screen.
2. Ensure you have all accessories for all types of mounting (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result in damage to the
equipment, or injury to the user or installer. The product warranty does not cover the damage caused by improper installation.
4. For the wall-mounting kit, use the M8 mounting screws (with a length 15 mm longer than the thickness of the mounting bracket) and tighten them
securely.
5. Weight of the unit without base=96.21 kg. The equipment and its associated mounting facilities still remain secure during the test. Use only the UL
listed Wall Mount Bracket with a minimum weight/load of 96.21 kg.
1.4.1. VESA Grid
86BDL4152T
Caution:
To prevent the display from falling:
• For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially available. For detailed instructions
about the installation, refer to the guide provided with the bracket.
• To prevent the display from falling in case of earthquake or other natural disaster, please consult the manufacturer of the bracket for the mounting
location.
• As this product is high and heavy, the installation of this product is recommended to be performed by four technicians.
Ventilation Requirements for enclosure locating
Leave a space of 100 mm at the top, rear, right and left of the display for ventilation.
VESA Grid
Table
600(H) x 400(V) mm
100 mm
5
86BDL4152T
Protective Sheet
100 mm
100 mm
100 mm