Repair Cam (Restore Factory Settings) - Philips GoGEAR SA2CAM04KN/55 User Manual

Repair CAM (restore factory
settings)
Philips Songbird has a repair feature that you
can use to restore CAM to the factory settings.
Before you proceed, back up your files that are
stored on CAM if possible.
Caution
•
The following procedure erases all your files
that are stored on CAM, and restores the
factory settings.
1
Install Philips Songbird on your computer
(see chapter Install software), and then
launch the program.
2
In the Philips Songbird menu bar (at the
top), click on the Tools pull-down menu
and then select Repair My CAM.
3
Follow the on-screen instructions to
complete the repair procedure.
EN
15