Fujitsu B20T-6 LED Operating Manual page 27

Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO

The message ECO Mode ein or ECO Mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode
Colour
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
keep them pressed for a few seconds.

The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.
Fujitsu Technology Solutions
button to switch the ECO operating mode on or off.
Office
6500 K
reduced
button and the INPUT button at the same time and
Operation
23