Table of Contents
Advertisement
Operation
Select OSD language
If one of the buttons is being pressed for the first time for the OSD menu, the
selection screen for the language is displayed:
► Press the
/
► Press the
MENU
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
► Press the
AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Select input signal (D-SUB/DVI-D)
► Press the
INPUT
► Press the
/
monitor connection (VGA or DVI).
► Press the
MENU
This setting window can also be called when the OSD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
the monitor with the ON/OFF switch.
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
22
button or the
/
/
button to confirm.
button for about 1 second.
button to call the Input select setup window.
button or the
/
button to confirm or the
MENU
button for a few seconds while you switch on
button to choose the desired language.
/
button to select the desired
AUTO
/
button to cancel.
Fujitsu Technology Solutions
Advertisement
Table of Contents
