Table of Contents
Advertisement
en
Cleaning and maintenance
Carefully unscrew the pump cover;
4.
residual water may leak out.
Clean the interior, pump cover thread
and pump housing. The impeller in
the drain pump must be able to
rotate.
5.
Refit and screw on the pump cover.
The handle must be in a vertical
position.
6.
Close the service flap.
Note:
To prevent unused detergent
from flowing straight into the drain during
the next wash: Pour 1 litre of water into
dispenser II and start the Spin
programme.
42
The drain hose at the siphon
is blocked
Turn the programme selector to Off.
1.
Pull out the mains plug.
Loosen the hose clamp. Carefully
2.
remove the drain hose; residual water
may leak out.
Clean the drain hose and siphon
3.
connecting piece.
Re-attach the drain hose and secure
4.
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the
supply hose:
Turn off the water tap.
1.
2.
Select the Cottons (activate G
SpeedPerfect setting) programme.
Note:
If your appliance with
intelligent dosing system
need to deactivate the intelligent
dosing system.
3.
Select the A Start/Pause button.
Allow the programme to run for
approx. 40 seconds.
Turn the programme selector to Off.
4.
5.
Pull out the mains plug.
* Depending on the module
*
, you also
Advertisement
Table of Contents
