Cleaning The Roll Paper Feeder - Epson SureColor T5475 User Manual

1. Make sure roll paper or cut sheet paper is loaded in the printer. You need at least this much paper to
print the adjustment pattern:
• Roll paper: 11.2 inches (285 mm)
• Cut sheet feeder: 1 sheet of paper sized A4 (8.3 × 11.7 inches [210 × 297 mm]) or larger
2. Press the
3. Do one of the following:
• Roll paper: Select the roll paper information area and select Media Adjust > Print Head
Alignment - Manual.
• Cut sheet: Select Paper Setting > Cut Sheet (1 sheet) > Media Adjust > Print Head Alignment
- Manual
4. Select Start to print the adjustment pattern.
5. Follow the instructions on the LCD screen to select the best patterns for each set of adjustment
patterns and select OK.
The screen displays a confirmation message and returns to the home screen.
Parent topic:
Related references
Paper Setting Menu
Related tasks
Loading Roll Paper
Loading Single Cut Sheets

Cleaning the Roll Paper Feeder

If ink smears on a printout when printing on roll paper or cut sheets, you can clean the roll paper feeder
to remove excess ink.
1. Load the widest available roll paper in the printer.
2. Press the
3. Select Paper Setting > Roll Paper > Feed/Cut Paper.
4. Press and hold
5. Select
Parent topic:
home button, if necessary.
Adjusting Print Quality
home button, if necessary.
Forward until there are no ink smears on the ejected roll paper.
Cut to cut the roll paper.
Adjusting Print Quality
165