Samsung AR FQSS Series User & Installation Manual page 33

Accessories in the outdoor unit case
5-wire
Assembly Cable (1)
Assembly Cable (1)
 09
12/18/24
• T he flare nuts are attached to the end of each pipe of an evaporator or a service port.
Use the nuts when connecting the pipes.
• T he assembly cable is optional. If it is not supplied, use the standard cable.
• T he drain plug and rubber leg are only included when the air conditioner is supplied without the assembly
pipe as seen in the picture below.
Optional accessories
The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air
conditioner.
Insulated Insulated Assembly
Assembly Pipe, Pipe, Ø9.52mm (1)
Ø6.35mm (1)
09
Rubber Legs (4) Pipe Clamps A (3)
Foam
Insulation
(1)
• If these accessories are supplied, they will be in the accessory box.
Tools required for installation
General Tools
• Vacuum Pump(Backward flowing prevention)
• Torque Wrench
• Screw Driver
Tools for test operations
• Thermometer
A3050 FA_IB&IM_DB68-04003A_HP_EN.indd 33
2-wire 3-wire
Assembly Cable (1)
12/18/24
Insulated Assembly Insulated Assembly
Pipe, Ø12.70mm (1) Pipe, Ø15.88mm (1)
12/18
Pipe Clamps B (3) Cement Nails (6)
• Pipe Cutter • Reamer
• Spanner • Drill
• Resistance Meter • Electroscope
English-33
Drain Plug (1) Rubber Leg (4)
PE T3 Foam Tube
Insulation (1)
24
M4 x 25 Tapped
Screws (6)
• Manifold Gauge • Stud Finder
• Pipe Bender • Spirit Level
• L Wrench • Measuring Tape
Vinyl Tapes (2) Drain Plug (1)
Drain Hose,
Putty 100g (1)
length 2m (1)
2013-12-25 15:27:46