Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGNN645K
Summary of Contents for Zanussi ZGNN645K
- Page 1 User Manual GETTING STARTED? EASY. ZGNN645K ZGNN645X EN User Manual...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
CAUTION: The appliance must not be supplied through an • external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. CAUTION: The cooking process has to be supervised. A short •... -
Page 4: Electrical Connection
• Keep the minimum distance from other • Connect the mains plug to the mains socket appliances and units. only at the end of the installation. Make sure that • Always take care when moving the appliance as there is access to the mains plug after the it is heavy. -
Page 5: Before The Installation
• This appliance is for cooking purposes only. It WARNING! Risk of fire and explosion must not be used for other purposes, for example room heating. • Do not let acid liquids, for example vinegar, • Fats and oil when heated can release flammable lemon juice or limescale remover, touch the hob. -
Page 6: Important Safety Requirements
Model ........Make sure that, once the hob is installed, it is easily PNC ......... accessible for the engineer in the event of a Serial number ......breakdown. The manufacturer will not accept liability, should the IMPORTANT SAFETY REQUIREMENTS above instructions or any of the other safety This hob must be installed in accordance with the instructions incorporated in this instruction booklet Gas Safety (Installation and Use) Regulations... -
Page 7: Injectors Replacement
Rigid connection: Carry out connection by using metal rigid pipes (copper with mechanical end). INJECTORS REPLACEMENT 1. Remove the pan supports. 2. Remove the caps and crowns of the burner. 3. With a socket spanner 7 remove the injectors and replace them with the ones which are necessary for the type of gas you use (see table in "Technical Data"... -
Page 8: Replacement Of The Connection Cable
• Make sure that there is access to the mains plug C. Brown after the installation. D. Cord clamp Electrical Requirements E. Blue The wires in the cord are coloured as follows: Permanent electrical installation must agree with the latest I.E.E. Regulations and local Electricity Green and yellow - Earth Board regulations. - Page 9 present. The cord clamp must be correctly If a furniture unit is installed at a attached to the outer sheath. distance of 400 mm above the hob, there must be a minimum ASSEMBLY safety distance of 50 mm to the left or right from the edge of the hob.
-
Page 10: Possibilities For Insertion
min 30 mm min 5 mm (max 150 mm) 60 mm A. Removable panel B. Space for connections CAUTION! Install the appliance only on a worktop with flat surface. Kitchen unit with oven The electrical connection of the hob and the oven POSSIBILITIES FOR INSERTION must be installed separately for safety reasons and The panel installed below the hob must be easy to... -
Page 11: Daily Use
CONTROL KNOB Symbol Description Symbol Description minimum gas supply no gas supply / off position ignition position / maximum gas supply DAILY USE C. Ignition candle WARNING! Refer to Safety chapters. D. Thermocouple IGNITION OF THE BURNER BURNER OVERVIEW Always light the burner before you put on the cookware. -
Page 12: Turning The Burner Off
CAUTION! In the absence of The hob is supplied with the electricity you can ignite the burner progressive valves. They make the without electrical device; in this case flame regulation more precise. approach the burner with a flame, turn the control knob counter-clockwise to TURNING THE BURNER OFF maximum gas supply position and To put the flame out, turn the knob to the off... -
Page 13: Care And Cleaning
CARE AND CLEANING WARNING! Refer to Safety chapters. GENERAL INFORMATION • Clean the hob after each use. • Always use cookware with a clean base. • Scratches or dark stains on the surface have no effect on how the hob operates. •... -
Page 14: Troubleshooting
TROUBLESHOOTING WARNING! Refer to Safety chapters. WHAT TO DO IF... Problem Possible cause Remedy There is no spark when you try The hob is not connected to an Check if the hob is correctly to activate the spark generator. electrical supply or it is con- connected to the electrical nected incorrectly. -
Page 15: Technical Data
LABELS SUPPLIED WITH THE ACCESSORIES Stick the adhesive labels as indicated below: MOD. MOD. MOD. TYPE PROD.NO. IP20 PROD.NO. PROD.NO. SER.NO. 0049 SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY A. Stick it on Guarantee Card and send this part C. -
Page 16: Energy Efficiency
BURNER POWER kW POWER kW MARK G30 28-30 mbar G31 37 mbar Multi Crown 3,65 Semi-rapid 0,45 Auxiliary 0,33 ENERGY EFFICIENCY PRODUCT INFORMATION ACCORDING TO EU 66/2014 Model identification ZGNN645K, ZGNN645X Type of hob Built-in hob Number of gas burners... -
Page 17: Environmental Concerns
Left rear - Semi-rapid 54.5% Right rear - Semi-rapid 58.1% Energy efficiency per gas burner (EE gas burner) Left front - Multi crown 59.7% Right front - Auxiliary not applicable Energy efficiency for the gas hob 57.4% (EE gas hob) EN 30-2-1: Domestic cooking appliances burning gas - Part 2-1 : Rational use of energy - General ENERGY SAVING •... - Page 20 WWW.ZANUSSI.COM/SHOP...