Table of Contents
Advertisement
(5) Receive data
• Set to Enable or Diable.
• If the setting is "Enable", receive data via RF or IP.
• If the setting is "No", data carousel is not supported. It can be downloaded via only USB.
(6) RF Type
• Sets the RF modulation type to DVB-T or DVB-C. The default value is DVB-T.
(7) RF Freq.(kHz)
• Sets the RF frequency at which the Pro:Centric data is received.
• Frequency tolerance : start frequency~end frequency for each country
• If the RF Type is DVB-T, it can be changed in the range of 47000~890000.
• If the RF Type is DVB-C, it can be changed in the range of 46000~862000.
(8) P:C IP Setting
• It can be set using the < > button or number buttons.
- (IP a) : Sets the first number in the IPv4 address.
- (IP b) : Sets the second number in the IPv4 address.
- (IP c) : Sets the third number in the IPv4 address.
- (IP d) : Sets the fourth number in the IPv4 address.
- (Port) : Sets the actual port number where the Pro:Centric server is running. It can be set using
the < > or number buttons.
• The default value of IP a/b/c/d is 0 and the range is between 0 and 255. The default value of Port
is 80 and the range is between 0 and 65535.
41
Advertisement
Table of Contents
