Table of Contents
Advertisement
(c) Stand By
y Sets the sending and receiveing scenario of OpStandBy(0x0c) command.
y
y The detailed scenario is described on the table below.
y
(d) Forced Initialize
y If 'No' is selected, a command should be sent and received between the TV and a -device for
y
proper initialization.
y If 'Yes' is selected, initialization is implemented when a device receives a command.
y
If initialization is not implemented, the TV remote control and local key will work.
(2) HTNG HotelMode
y If the following options are selected because of the HTNG command:
y
*Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume,
then the value for the HTNG HotelMode changes automatically to Yes and, even if the
HotelMode is set to No, the above options are still affected.
y If you change it to No, then the values set by the HTNG will be canceled.
y
36
Send
Send Only
O
Receive Only
X
All
O
OFF
X
Receive
X
O
O
X
Advertisement
Table of Contents
