•
The phone receives interference from the
nearby electrical appliances. Move the base
station away from them.
•
The phone is at a location with thick walls.
Move the base away from them.
The handset does not ring.
•
Make sure the handset ringtone is turned
on.
•
Make sure the handset is registered to the
base station.
The caller ID does not display.
•
The service is not activated. Check with
your service provider.
•
The caller's information is withheld or
unavailable.
The handset cannot display characters * and #.
Characters * and # respectively appear as small
'n' and small 'o' in the LCD display. This is normal
behavior because of the 7-segment in the 2nd
row of the display (you can find the characters
on these 4 buttons:
Note
•
If the above solutions do not help, disconnect the
power supply from both the handset and base station.
Try again after 1 minute.
EN
36
and
).