Adjusting The Picture - Sharp XV Z90E/U Operation Manual

Adjusting the Picture

2, 3
On-screen Display
e. g. (VIDEO input in INPUT 3 or 4 mode)
1
2
-29
You can adjust the projector's picture to your prefer-
ences with the following picture settings. To save the
settings, select a memory from 1 to 5 and OFF (see
page 32) and then adjust the settings.
Description of Adjustment Items
Selected item
Contrast
Bright
Color
Tint
1, 4
Sharp
Red
Blue
CLR Temp
Gamma
White Emphasis
Picture Setting
Reset
• "Color", "Tint" and "Sharp" do not appear for RGB input in
• For details on "Gamma", see "Gamma Correction
• For details on "CLR Temp", see "Adjusting the Colour
• For details on "White Emphasis", see "Description of
• For details on "Picture Setting", see "Picture Setting
• To reset all adjustment items, select "Reset" on the "Picture"
• "Tint" cannot be used with PAL, SECAM, PAL-M, PAL-N or
button
For less contrast
For less brightness
For less colour intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
For selecting a desired item from six colour temperature
settings
For selecting a desired item from four gamma positions
For switching "on" or "off" the function that emphasizes
bright portions of the image
For storing all items set in "Picture"
All image adjustment items are returned to the factory
preset settings.
INPUT 2 mode.
Function" on page 31.
Temperature" on page 30.
White Emphasis" on page 30.
Function" on page 32.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/ to select a specific adjustment item.
3 Press
/ to move the
adjustment item to the desired setting.
4 To exit the menu screen, press MENU.
menu screen and press ENTER.
PAL-60.
button
For more contrast
For more brightness
For more colour intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
mark of the selected