Table of Contents
Advertisement
failure) is indicated by flashing the alarm icon and
freezer temperature indicators, and sounding of
buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows the
highest temperature reached for a few seconds,
then displays the set temperature again.
The alarm indicator continues to flash
until the normal conditions are
restored.
QUICKCHILL FUNCTION
If you need to insert a large amount of warm food,
for example after doing the grocery shopping, we
suggest activating the QuickChill function to chill
the products more rapidly and to avoid warming the
other food which is already in the refrigerator.
1. Press the Mode until the corresponding icon
appears.
The QuickChill indicator flashes.
2. Press the OK to confirm.
The QuickChill indicator is shown.
The QuickChill function shuts off automatically after
approximately 6 hours.
To switch off the function before its automatic end,
repeat the procedure.
The function switches off by selecting
a different fridge set temperature.
HOLIDAY MODE
This mode allows you to keep the appliance closed
and empty during a long holiday period without the
formation of bad odours.
1. Press the Mode until the corresponding icon
appears.
The Holiday indicator flashes. The temperature
indicator shows the set temperature.
2. Press the OK to confirm.
The Holiday indicator is shown.
This mode switches off after selecting
a different temperature.
QUICKFREEZE FUNCTION
The QuickFreeze function accelerates the freezing
of fresh food and, at the same time, protects
foodstuffs already stored from undesirable
warming.
1. To activate this function press the Mode button
until the corresponding icon appears.
The QuickFreeze indicator flashes.
6
2. Press the OK button to confirm.
TheQuickFreeze indicator is shown.
This function stops automatically after 52 hours.
To switch off the function before its automatic end
repeat the procedure until the QuickFreeze
indicator turns off.
The function switches off by selecting
a different set temperature.
DOOR OPEN ALARM
An acoustic alarm will sound if the door is left open
for a few minutes. The door open alarm conditions
are indicated by:
•
a flashing Alarm indicator;
•
an acoustic buzzer.
When normal conditions are restored (door
closed), the alarm will stop. The buzzer can also be
switched off by pressing any button.
CHILDLOCK FUNCTION
Activate the ChildLock function to lock the buttons
from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat the
procedure until the ChildLock indicator goes off.
DRINKSCHILL FUNCTION
The DrinksChill function is to be used to set an
acoustic alarm at the preferred time, useful for
example when a recipe requires to cool down food
products for a certain period of time.
It is also useful when a reminder is needed in order
not to forget the bottles placed in the freezer for
fast cooling.
1. Press Mode until the corresponding icon
appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes) for a
few seconds.
2. Press the Timer regulator to change the Timer
set value from 1 to 90 minutes.
3. Press OK to confirm.
TheDrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm sounds.
Press OK to switch off the sound and terminate the
function.
Advertisement
Table of Contents
