Table of Contents
Advertisement
12.
Using the Wi-Fi function
Displaying pictures on a TV
You can display pictures on a TV that supports the
Digital Media Renderer (DMR) function of the DLNA
standard.
•
If you display pictures using the Wi-Fi function, they
cannot be output in 4K resolution. To output them in 4K
resolution, connect the camera and the TV with an HDMI
micro cable.
(P301)
Preparations:
Set the TV to DLNA waiting mode.
•
Read the operating instructions for your TV.
1
Select the menu.
> [New Connection] > [Playback on TV]
Wi-Fi
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
•
When the connection is established, the screen is displayed.
4
Take or play back pictures on this unit.
•
To change the setting or disconnect, press [Wi-Fi].
•
When a TV is connected to this unit, the TV screen may temporarily return to the status before
the connection. Pictures are displayed again when you take or play back pictures.
•
[Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures cannot be played back.
•
During the multi/calendar playback, pictures displayed on the screen of this unit are not
displayed on TV.
(P288)
(P252)
268
Advertisement
Table of Contents
