Table of Contents
Advertisement
12.
Using the Wi-Fi function
∫
Changing the connection method
To change the connection method, press [DISP.], and then select the connection method.
When connecting with [Via Network]:
On the camera
1
Select [Via Network].
•
Follow the connection procedure described on
access point.
On your smartphone/tablet
2
Turn on the Wi-Fi function.
3
Connect the smartphone to the wireless access point to which the camera is
connected.
4
Start "Image App".
When connecting with [WPS Connection]
On the camera
1
Select [Direct].
•
Follow the connection procedure described on
smartphone.
On your smartphone/tablet
2
Start "Image App".
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device
and make security-related settings. To check whether your smartphone supports the
function, refer to the operating instructions of the smartphone.
∫
Terminating the connection
After use, terminate the connection to the smartphone.
1
Press [Wi-Fi] on the camera.
2
On the smartphone, close "Image App".
(If you are using an iOS device)
On the screen of "Image App", press the home button to close the app.
(If you are using an Android device)
On the screen of "Image App", press the return button twice to close the app.
(P254)
¢
(P254)
(P252)
258
P289
to connect the camera to a wireless
in [Direct]:
P291
to connect the camera to the
Advertisement
Table of Contents
