Canon PIXMA G7040 Online Manual page 554

• Hang up phone
The handset is not placed in the handset cradle correctly.
Replace the handset correctly.
Note
• See A Message for Faxing Is Displayed on Fax Standby Screen for the message displayed on the fax
standby screen.
Error Regarding Automatic Duplex Printing Is Displayed
See Automatic Duplex Printing Problems and take the appropriate action.
Check
Error Regarding Power Cord Being Unplugged Is Displayed
(Windows)
The printer may have been unplugged while it was on.
Important
• If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
Check the error message that appears on the computer and click OK.
The printer starts printing.
See Unplugging the Printer
Writing Error/Output Error/Communication Error (Windows)
If the ON lamp is off, make sure printer is plugged in and turn on.
Check1
The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.
Make sure printer is properly connected to computer.
Check2
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:
for unplugging the power cord.
554