Table of Contents
Advertisement
Network settings
■
Use the Easy IP Setup Software
to establish the unit's settings
The settings related to the unit's network can be established
using the Easy IP Setup Software supplied.
You can obtain Easy IP Setup Software (EasyIPSetup.exe)
by downloading it from the following website.
https://pro-av.panasonic.net/
To establish the settings for a multiple number of units, the
settings must be selected for each camera involved.
If the settings cannot be established using the Easy IP Setup
Software, select the settings separately for the unit and
personal computer on the Network setup screen [Network] of
the setting menu. (page 103)
Notes
● If, after the network settings have been established,
another device in the same network has the same IP
address, the network operations will not be performed
properly.
Set the IP address in such a way that it does not
duplicate an existing IP address.
● Do not establish network settings from a multiple
number of Easy IP Setup Software programs at the
same time for a single camera.
Similarly, do not perform the "Auto IP setting" operation
of the remote camera controller (AW-RP50) at the
same time.
The IP address settings may no longer be recognized
as a result.
● When you start the Easy IP Setup Software, you may
be asked for the administrator account password.
● To enhance security, the Easy IP Setup Software is
designed so that when around 20 or more minutes
have passed after the power was turned on, the
network settings of the target camera can no longer be
configured. (When the [Easy IP Setup accommodate
period] setting is [20min] → page 105)
● The Easy IP Setup Software cannot be used from a
different subnet via a router.
[When using Windows]
1
Start the Easy IP Setup Software.
2
Click the [Search] button.
3
Click the MAC address/IPv4 address of the
camera to be set, and click the [Network
Settings] button.
Notes
● When a DHCP server is being used, the IP
address allocated to the unit can be checked by
clicking the [Search] button of the Easy IP Setup
Software.
● If the same IP address is used for any additional
cameras, the numbers of the additional cameras
will be displayed in the "IPv4 overlap" column of
the cameras concerned.
● When the [Access Camera] button is clicked, the
Live screen of the selected camera is displayed.
25
Advertisement
Table of Contents
