Table of Contents
Advertisement
Connection failed. Please check your
phone to confirm connection.
Wi-Fi connection failed and Android
Auto app did not start.
Check if the Wi-Fi function on the
–
device is turned on.
Android Auto has disconnected.
Wi-Fi function on the device or the unit
is turned off.
Turn on the Wi-Fi function on the
–
device and the unit when you use
Android Auto (page 18).
To use Android Auto, please stop your car
and follow the instructions on your
phone
The default settings are displayed on
the screen of the Android Auto
compatible device or images are not
output from the Android Auto
compatible device.
Park your vehicle in a safe place, and
–
follow the instructions displayed on
the screen. If the error message is still
displayed after performing on-screen
instructions, please reconnect the
device.
Camera View & AUX
No Video Signal
There is no video signal input.
Confirm whether the connection with
–
the unit is established and there is an
output from the external device.
Bluetooth
Handsfree device is not connected
The phone's Bluetooth HFP is not
connected and cannot make calls.
Make a Bluetooth connection
–
(page 12).
Phone book access is not authorized
The Bluetooth PBAP of the mobile
phone is not connected and the phone
book cannot be downloaded.
Make a PBAP connection. You need to
–
operate your phone and allow the unit
to access the contact information on
your phone. When the related
information pops up on your phone,
follow the pop-up message.
Others
Overcurrent caution on USB.
Overcurrent is detected.
Check the USB connection. Perform
–
one of the following operations to fix
the situation.
Turn off the ignition switch (ACC OFF)
–
and then turn the ignition switch to on
(ACC ON) again.
Power the unit off and then power it
–
on again.
Disconnect the (+) battery cable and
–
then connect it again.
Overload Caution on AMP.
An amplifier overload is detected.
Check the amp connection. Perform
–
one of the following operations to fix
the situation.
Turn off the ignition switch (ACC OFF).
–
After 9 seconds or more, turn the
ignition switch to on (ACC ON) again.
Disconnect the (+) battery cable and
–
then connect it again.
- 54 -
Hide quick links:
Advertisement
Table of Contents
