Table of Contents
Advertisement
[LAMP REMAIN TIME]
[LAMP STATUS]
[APERTURE (CONTRAST-SHUT-
TER)]
[AIR FILTER]
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
1 [WIRELESS LAN]
Displays the configuration details of wireless LAN.
[Basic control] page
Click [Projector control] → [Basic control].
1 [INPUT]
Switches the input signal.
2 [VOLUME]
Adjusts the volume level.
3 [PICTURE MODE]
Switches the picture mode.
Note
f After selecting [NETWORK/USB] in [INPUT], it will select the previous input source. If you need to select the other, please
press the <MEMORY VIEWER> / <MIRRORING> / <Panasonic APP> button on the remote control.
f When [NETWORK/USB] → [WIRELESS LAN] is set to [SIMPLE], [S-DIRECT] or [M-DIRECT], and the web control function
is enabled in the wireless LAN connection, if you switch the input to [MEMORY VIEWER] or [MIRRORING], the wireless
connection will be cut off and the web control function cannot be used any more.
Chapter 4 Settings - [NETWORK/USB] menu
Chapter 4 Settings - [NETWORK/USB] menu
The lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the lamp.
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
There is too much dust accumulated in the air filter unit. Turn off the projector and
unplug the power plug from the wall outlet, then replace the air filter unit.
1
2
2 [WIRED LAN]
Displays the configuration details of wired LAN.
4 [AV MUTE]
Switches between AV mute on/off.
5 [POWER]
Turns on/off the power.
6 [CLOSED CAPTION]
Switches the closed caption mode.
1
2
3
4
5
6
ENGLISH - 103
Advertisement
Chapters
Table of Contents
