Adjusting Monitor Height Tension - Gateway FPD1975W User Manual

12
13

Adjusting monitor height tension

The stand is factory adjusted to maintain the height for your monitor. However, if it does not
stay in place when you let go, you need to change the stand's height tension. You also need to
adjust the stand if the amounts of force required to raise and lower the monitor are not equal.
To adjust your monitor's height tension:
1
www.gateway.com
Slide the neck's bracket slot onto the bracket's mounting tab.
Press the bracket lever to the right and hold it, then lower the neck into place and release
the lever.
Press the screwdriver access hole cap from below the base to remove it from the base.
Screwdriver access cap
7