Table of Contents
Advertisement
To remove the battery
Remote Control Battery
1. Press the guide and pull out
the battery base.
Trademarks
•
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
•
PJLink
™
is a trademark or pending trademark in Japan, the United States, and other countries and regions.
•
RoomView, Crestron RoomView are registered trademarks of Crestron Electronics, Inc, and Crestron
Connected is the trademark of Crestron Electronics, Inc.
•
Other names, company names or product names used in these operating instructions are the trademarks or
registered trademarks of their respective holders.
Please note that the operating instructions do not include the
Illustrations in these operating instructions
Note that illustrations of the projector and screens may differ from the ones you actually see.
•
Page references
•
In these instructions, references to pages are indicated as: (
Term
•
In these instructions, the "Wireless remote control unit" accessory is referred to as the "Remote control".
2. Remove the battery.
®
and
TM
symbols.
Æ
page 00).
Read this first!
ENGLISH -
7
Advertisement
Table of Contents
