Table of Contents
Advertisement
Chapter 9.
Use the LCD Panel
This feature is only provided by the NAS models with LCD panels. Please visit
http://www.qnap.com for details.
The NAS provides a handy LCD panel for users to perform disk configuration and view the
system information.
When the NAS has started up, the server name and IP address will be shown.
N A
S
5
F
4
1
6
9
.
2
5
For the first time installation, the LCD panel shows the number of hard drives detected and
the IP address. Configure the hard drives.
Number of hard
drives detected
1
2
3
4 or above
*Press the "Select" button to choose the option, and press the "Enter" button to confirm.
For example, when 5 hard drives installed are available on the NAS, the LCD panel shows:
C
o
n
f
i
g
→ R
A
I
D 5
Press the "Select" button to browse more options, for example, RAID 6.
Press the "Enter" button and the following message shows. Press the "Select" button to
select "Yes" to confirm.
C
h
o
o
s
e
→ Y
e
s
D E
3
4
.
1
0
0
Default disk
configuration
Single
RAID 1
RAID 5
RAID 5
.
D i
s
R A
I
D 5
N o
.
1
0
0
Available disk configuration options*
Single -> JBOD ->RAID 0 -> RAID 1
Single -> JBOD -> RAID 0 -> RAID 5
Single ->JBOD -> RAID 0 -> RAID 5
k
s
?
?
62
Single
-> RAID 6
Advertisement
Table of Contents
