Chapter 7. Install And Hot-Swap Hard Drives; Install Hard Drives - QNAP Turbo NAS HS-210 Hardware User Manual

Chapter 7. Install and Hot-swap Hard Drives
Caution:
Before starting, please ensure that you turn off the NAS, disconnect the power

adaptor, network cable(s), and also remove any other device/cable that is attached to
the NAS.
Please ensure that you wear an antistatic wrist strap during the entire process to

prevent electrostatic discharge. The crocodile clip should be connected to the ground.
7.1

Install Hard Drives

Follow the below steps to install hard drives on the NAS.
TS-453Mini
1. Remove the case cover. Open and remove the hard drive tray.
2. Install the HDD:
53