Cvp-105: Assembly - Yamaha CVP-109 Reference Booklet

1
• Phone jacks
• Cardboard packing cushions
46
CVP-109/107/105/103/700
Downloaded from: http://www.usersmanualguide.com/

CVP-105: Assembly

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the
correct direction. Please assemble in accordance with the se-
quence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated above. Use of
incorrect screws can cause damage.
• Be sure to tighten up all screws upon completing assembly of each
unit.
• To disassemble, reverse the assembly sequence given below.
Z
Open the box and remove all the parts.
Take out the two cardboard packing cushions and place
them on the floor. Then take out main unit and place it on
top of the packing cushions. Position the cushions so as to
protect the phone jacks on the base of the unit.
Remove all parts from the box. Confirm that all parts
shown in the illustration above are provided.
CAUTION
• When you lift the pedal box assembly, make sure that you lift by
both legs.
• AC power cord
• 5 x 12 mm screws x 30