Changing Option Bay Modules - Gateway Solo 2150 User Manual

Changing option bay modules

Your notebook has an option bay that can hold a CD drive, DVD drive, or
ZIP drive.
Important
To swap option bay modules:
1
Save all work and turn off your notebook. Make sure the notebook is
actually off, and not in Hibernate mode. For more information on
Hibernate mode, see "Changing settings in Windows 98" on page 45.
2
Close the cover and turn your notebook over.
3
Slide and hold the option bay latch open, then pull the module straight
out and away from your notebook.
When changing modules, you must shut down your
notebook before replacing the module and restart the
notebook after the new module is correctly installed. If the
computer is already off, make sure it is not in Hibernate
mode and that Windows is completely shut down.
Changing option bay modules
35