Dukane 6530B User Manual page 52

CONNEC- SSID
TION
SECURITY SECURITY
INDEX
SECURITY
KEY
• NAME
PROJECTOR NAME
HOST NAME
• ALERT MAIL
ALERT MAIL (English
only)
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1,2,3
TEST MAIL
SAVE
Enter an identifier (SSID) as an access point. SSID must be 1 to 32 alphanumeric
characters (including a space).
Select security type.
When WEP 64bit or WEP 128bit is selected for SECURITY, activate the INDEX. The
value for this is fixed at "1".
Set a SECURITY KEY. SECURITY KEY must be 8 to 63 alphanumeric characters
(including a space).
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
Enter the hostname of the network connected to the projector. A host name must be
16 or less.
This option will notify your computer of lamp replace time or error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The lamp and filters are at the end of its usable life. Please replace the lamp and
filters.
Projector Name: NEC Projector / DUKANE Projector
Lamp Hours Used: 100 [H]
Enter sender's address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient's address. Up to three addresses can be entered.
Send a test mail to check whether your settings are correct or not
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network
settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this
happen, check if the Recipient's Address is correct.
Click this button to save the above settings on the projector.
41
3. Convenient Features